Our ZIM 518 machine is an entry-level and investor-friendly machine designed for the production of double-layer paving stones. ZIM 518 comes out with low energy consumption, low investment cost and high return on investment.
Our machine, which can produce 5 concrete blocks or 18 concrete paverstones in one press, is designed to produce 1000 pallets per day. However, if requested, it can also produce concrete curbstones of 1 meter length! To facilitate this production and increase quality; It has many features such as driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. Our machine is designed as manual system and it is managed by the operator with a hydraulic unit and a joystick.
Although it is a budget-friendly machine and can be installed within hours, our ZIM 518 machine enables the production of high quality paving stones. Our machine gives you a good position in the competition!
We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service.
|Machine Working System
|Fully Automatic PLC Controlled / Semi-Automatic
|Machine Production Capacity
|120 Pallets / Hour
|Production Pallet Dimensions
|Manual System: 1150x700x40mm
|Mold Usage Area
|1050mm x 510mm
|Number of Products on a Pallet
|18 pcs of paverstone
|5 pcs Block ( 200x400x200mm )
|Minimum Product Height
|Maximum Product Height
|Upper Vibration Power
|0.33 kW x 2 pcs
|Lower Vibration Power
|5.5 kW x 2 pcs
|REXROTH / EATON / DANFOSS BRANDS ARE USED.
|SİEMENS / SCHNEİDER / ABB BRANDS ARE USED.
|Total Power Usage
|It varies according to the facility configuration.